24/7 EMERGENCY HELP CALL DAY OR NIGHT! 314-668-1223

drywall water damage

How To Fix a Water Stain on Drywall

Modern homes use drywall as a budget-friendly option for creating walls and ceilings in interior spaces. It’s also great for designing features such as arches and eaves. Unfortunately, drywall isn’t strong enough to hold its own against water damage. This not only causes unsightly water stains but may also lead to the drywall losing its structural integrity.  This blog post highlights the causes of drywall water damage and how to deal with ugly stains. 

Common Causes of Water Stains on Drywall

Some of the issues that could cause hideous water stains on drywall include the following.

Drywall Installation in a Wrong Area

It’s true that drywall is durable. But that doesn’t mean it’s suitable for every room in a home. This material is ideal for areas with low humidity and heat. 

Drywall installed in the bathroom, kitchen, basement, or other wet areas can quickly absorb moisture. This will result in staining, swelling, and mold growth. Replacing water-damaged drywall with another material is the best solution in this case. 

Heating Problems

When interior spaces condense during the winter, hot airborne moisture hits cold and dry air. Water droplets will form on cold surfaces as a result. These droplets can cause water stains if they form on the drywall. 

Plumbing Leaks

Drywall water stains could be a result of leaking pipes. Without regular plumbing maintenance, plumbing leaks can show when it’s already too late. The excess water will probably have reached the drywall, causing warping and mold growth. 

A professional plumber can help determine the source of the leak and the extent of drywall water damage. They’ll then advise on whether to repair or replace the drywall. 

Roofing Leaks

Water stains on drywall often indicate a roof leak. Without regular maintenance, the roof can deteriorate over time due to external elements and natural wear and tear. This will cause holes that can eventually result in leaks and water damage. 

Repairing Water Damaged Dry Wall and Preventing Water Stains

Following the simple steps below can help restore water-damaged drywall to its pristine condition and prevent the recurrence of unsightly water stains. 

Make Sure the Drywall Is Still Stable

Not all signs of water damage call for drywall replacement. A sagging ceiling means it’s time to replace the drywall. On the other hand, a simple repair can fix issues such as loose drywall and blistered paint. 

Scrape the Water-Damaged Drywall Away

Use a knife to gently scrape away the damaged part, including the flaking or flickered paint. Work from the center outward. After removing all the loose stuff, apply two coats of base sealer to properly seal the area. 

Apply Drywall Mud Before Sanding

The scraping and sealing processes leave a clean surface. Apply thin layers of drywall mud to the surface. 

Make sure the first layer is completely dry before sanding it and adding the next layer. Apply at least three layers for the best outcome. The first layer brings the repair nearly to the level of the surrounding unaffected drywall. 

The second coat levels out and “feathers in” to the surrounding drywall. The last coat helps to conceal the joints between the repair and the undamaged drywall. 

Get a Flawless Repair

Working slowly and meticulously with the drywall mud is essential for seamless results in drywall water damage repair. Smoothen the edges with a putty knife. This helps reduce the amount of sanding needed between each layer. 

Add a High-Quality Coat of Paint for a Perfect Finish

Start by priming the freshly repaired area. Next, apply high-quality paint to perfectly finish the repair of the water-damaged drywall. This repair process works best for small patches of damaged drywall. 

If the damage covers a wider area of the drywall, it’s best to call a professional. Opting for DIY repair may cause more harm than good, and fixing the mess can cost thousands of dollars. 

Trust Pride Cleaning & Restoration to Get Your Drywall Back in Pristine Condition

Water damage can really wreak havoc on a property. It’s quite unforgiving to drywall, causing unsightly stains and compromising its structural integrity. Calling an experienced professional is critical at the first sign of drywall water damage. 

Pride Cleaning & Restoration is the go-to expert for drywall restoration in the St Louis Metro area. The certified professionals can quickly return water-damaged and stained drywall to its original condition. They guarantee 100% satisfaction. 

Call Pride Cleaning & Restoration at (314) 668-1223 to get started today! Learn more about their services.

More Posts

Scroll to Top

GET A FREE ESTIMATE

BY FILLING OUT THE FORM BELOW